PRODUCTS
STROPP MAKRO FİBER
STROPP
Macro Fiber
Specialised for usage in Slab on Ground and Industrial Slabs
Advantages:
- Smooth and clear surface finishing. Easily barried inside concrete
- Higher strength with lower dose of fibers
- Can be pumped easily and does not harm equipment
- Does not cause substantial slump change in concrete
- Minimizes emergence and propogation of cracks.
Previous
Next
| Raw Material | Modified PP |
| Length | 54 mm |
| Tensile Strength | 550-650 MPa |
| Elastic Modulus | 6 GPa |
| Surface | Deformed Surface |
| Fiber Count | 70.000 fibers/kg |
| Density | 0,92 gr/cm3 |
| Melting Point | 165 C |
| Ignition Point | 360 C |
| Water Absorbtion | None |
| Acid/Alkali Resistance | Excellent |
| Related Standard | ASTM C1116 – TS EN 14889-2 |
| Diameter | 0,7 mm |
Standards and Calculation Methods
For static design calculations of slab on ground and horizontal structural elements, calculation methods are being used widely in international literature. In United States ACI (American Concrete Institute) guidelines are being used while European methods are based on TR34 (Technical Report 34-4th edition).
FIELD OF USE
Slab on Ground
Industrial Slabs
Precast Concrete
Previous
Next
Hyrdraulic Structures, Ports and Water Channels
Previous
Next
Signalization and Automation Structures
Concrete Roads